Chimney SweepService NYC
Coil of stainless steel chimney liner on a rooftop, ready to go into the chimney

Home Stainless steel chimney liners

Stainless steel chimney liners in Brooklyn

We install stainless steel liners in old masonry chimneys for fireplaces, gas boilers and water heaters, in Brooklyn row houses and apartment buildings.

5.0 on Google from 85 reviews
  • Open 24 hours
  • Flat-rate quotes
  • Camera inspections

Request a quote

Answer three short questions, and we will call or text you to set up a time.

Step 1 of 3
What do you need? Select all that apply.
About the chimney

What does the chimney serve?

What kind of building is it?

Where to reach you

By submitting, you agree to receive text messages from Chimney Sweep Service about your request and appointment. Message frequency varies. Message and data rates may apply. Reply STOP to opt out or HELP for help. See our privacy policy.

Thank you for your request

We will call or text you to set up a time. If you have photos of the chimney or the fireplace, you can text them to (646) 290-6327.

Stainless steel liners inside an opened masonry chimney

How a liner job works

  • Inspection first

    We inspect the flue with a camera and measure it. The size of the liner depends on the fireplace or the appliance it vents.

  • A flat-rate quote

    Liner jobs are quoted per job at a flat rate, based on the chimney height, access, materials and scope. Taxes and permit costs are added to the quote.

  • Installation

    We lower the stainless steel liner through the flue from the roof and connect it at the bottom to the fireplace or the appliance.

  • The top

    At the top we seal the liner and finish it with a cap, so rain, birds and debris stay out. See chimney caps.

  • Payment

    Installation jobs need a 50% deposit, and the balance is due when the work is done.

See photos from our liner jobs

Chimney liner questions

How do I know if my chimney needs a new liner?

An inspection shows it. Cracked or missing clay tiles, open joints between tiles, and a flue that is the wrong size for a new boiler or water heater are the usual reasons. We look at the flue with a camera and show you what we see. More in when a chimney needs a stainless steel liner.

What size liner does my chimney need?

It depends on what the chimney vents. For a fireplace, the liner is sized to the fireplace opening. For a boiler or water heater, it is sized to the appliance. We measure the flue and check the fireplace or appliance before we quote.

Do you line chimneys for gas boilers and water heaters?

Yes. We install liners for gas boilers and water heaters in homes and apartment buildings. See boiler and water heater venting.

Can a liner go into a chimney in a row house?

Yes. Most of our liner jobs are in older masonry chimneys. We lower the liner from the roof, so the work inside the home is usually at the fireplace or the appliance connection.

What payment do you need for a liner job?

Installation and repair jobs need a 50% deposit, with the balance due when the work is complete.

Other services

  • Chimney sweep and cleaning

    We sweep the flue, check it with a camera and leave the room clean. Every sweep includes an inspection.

  • Chimney caps

    Stainless steel caps for single and multi-flue chimneys that keep out rain, birds and debris.

  • Chimney inspection

    A camera check of the flue, the damper and the smoke chamber, with a plain answer on what it needs.

  • Chimney repair and draft problems

    Blocked flues, smoke coming into the room and chimneys that need more height to draw.

  • Chimney extensions

    We raise short chimneys to a proper height above the roof, so smoke draws up and out instead of into the room.

  • New chimney installation

    A new chimney or flue for a fireplace, stove or boiler, built for the appliance and the building it serves.

We work all over Brooklyn and Manhattan, in nearby parts of Queens and Staten Island, and as far as the Bronx. See all our services and our service area.

Call Get a quote